Aspen Woods, West Springs, Signal Hill, Springbank Hill, Coach Hill, Cougar Ridge, Discovery Ridge, Killarney, Marda Loop, Altadore, Garrison Woods, Lakeview, Richmond Hill, North Glenmore Park, Bankview, Spruce Cliff, Rosscarrock
SW Calgary service info
Quadrant
SW Calgary
Key neighbourhoods
Aspen Woods, West Springs, Signal Hill, Springbank Hill, Coach Hill, Cougar Ridge, Discovery Ridge, Killarney, Marda Loop, Altadore, Garrison Woods, Lakeview, Richmond Hill, North Glenmore Park, Bankview, Spruce Cliff, Rosscarrock
Typical home type
Mix of older inner-SW bungalows and newer outer-west builds with double and triple attached garages
Drive time from shop
Under 20 min
What we see on the ground in this quadrant — and how it shapes how we work.
Assess first, quote second, work third. Same process on every job.
01
We visit the space, assess the concrete, test for moisture, and check for any existing coatings or damage. You get a written quote covering system, scope, and timeline before any commitment.
02
Planetary grinder opens the slab to CSP 3. HEPA dust extraction runs the whole time. Existing coatings, paint, or contamination removed completely before any primer goes down.
03
If the slab reads above 4.5%, MVB FC/RC goes down before primer. On older SW Calgary slabs especially, this step is not optional — moisture is the most common cause of failure and it’s flagged at the assessment stage so there are no surprises.
04
Fusion Primer applied, followed by the base coat and Flake broadcast or metallic pour depending on the system selected. Wet film thickness checked throughout.
05
Polyaspartic topcoat applied. Return-to-service time confirmed based on the cure formulation. We walk the floor with you at completion and leave care instructions before we go.
Yes — the outer west neighbourhoods are some of our most active areas. Aspen Woods, West Springs, Signal Hill, Springbank Hill, Coach Hill, Cougar Ridge, and Discovery Ridge are all in regular rotation. Larger garages, newer slabs, and clients who want the full system done properly. Get a quote and we will confirm availability.
Yes. We cover the full SW quadrant from the inner communities through to the outer west. The older slabs in Killarney and Altadore typically need more prep work and often require an MVB moisture barrier — we flag this at the assessment stage so it is never a surprise on install day.
Yes — completely. Coating over paint that is not fully bonded will produce a floor that delaminates in months. We grind it off to bare concrete before any primer goes down. This is standard on the job, not an add-on.
A standard SW Calgary garage floor is typically a one-day job — prep and coating in the same visit. Basement systems with metallic finishes may need an overnight cure window before the topcoat. Timeline is confirmed at the quoting stage.
We assess the slab, test for moisture, and give you a real number. No guesswork. No phone call required.
