Flake epoxy garage floor coating is a multi-layer system - 100% solids epoxy base coat, flake broadcast for texture and colour, and a hard-wearing polyaspartic topcoat for lasting durability. Professionally installed in Calgary with diamond-ground prep and moisture seal where warranted, a Flake floor lasts up to 15 years.
Available in dozens of flake blends. Each swatch is a real flake sample - what you see is what goes on the floor.
coyote
wombat
shoreline
earth grey
grey stone
gravel
raven
orbit
domino
outback
← Swipe to see all finishes →
WHY FLAKE
Why Flake
Built to Last.
Durable Finish
Flake broadcast into epoxy creates a surface that handles daily traffic, dropped tools, and vehicle weight without chipping or peeling.
Slip Resistant
The flake texture adds natural grip underfoot - no additional grit needed in most residential and light commercial applications.
Easy to Clean
Smooth, continuous surface with no grout lines. Oil, dirt, and road salt wipe clean. No special cleaners required.
Hard-Wearing
Hard-wearing polyaspartic topcoat locks in colour and sheen for the long run. Built to take the daily punishment while keeping its gloss.
Low Maintenance
Sweep it, mop it, done. The continuous surface doesn't trap dirt, oil, or road salt - and holds up without recoating or resealing.
Minimal Downtime
Minimal disruption to your space. We work efficiently so you're back to normal as quickly as conditions allow.
← Swipe to see more →
What Makes Flake Epoxy the Right Choice for Calgary?
Flake epoxy uses coloured flake broadcast into a pigmented epoxy base, creating a surface that's durable, low-maintenance, and available in a wide range of colours and flake blends. The flake is broadcast into the wet base layer and locked under a hard-wearing polyaspartic topcoat, producing a smooth, durable finish that handles daily residential and light commercial use without issue.
Every install starts with diamond grinding - no exceptions. Where the slab warrants it, a moisture seal goes down before any epoxy touches the concrete. After prep, a pigmented epoxy base goes down, flake is broadcast to full coverage, excess is scraped and vacuumed, and the surface is sealed with a commercial-grade polyaspartic topcoat. The result is a hard-wearing, easy-to-clean floor with no grout lines and no joints.
Why Flake Holds Up in Calgary Winters
Calgary garages are tested hard every year: road salt tracked in on tires, rapid temperature swings from -30C to +15C in the same week, and melt water pooling on the slab. Flake epoxy is built for all of it. The hard-wearing topcoat locks in colour and sheen while handling the daily punishment, the flake texture maintains grip when the floor is wet from snow melt, and the full-broadcast surface is chemically resistant to oil, de-icers, and garage solvents. Properly installed, it won't peel, lift, or delaminate - even under hot tires.
How Long Does Flake Epoxy Last?
A flake epoxy floor that was diamond ground, properly sealed, and finished with a hard-wearing polyaspartic topcoat can last up to 15 years. The lifespan depends almost entirely on prep - not the colour you pick or the chip size. Floors that were acid-etched instead of ground, or that skipped moisture sealing when the slab needed it, tend to delaminate within a few years. That's why every EFC install starts with the slab, not the product. If the foundation isn't right, nothing applied over it will last.
SPECS
SPECS
System Specs.
System
3-4 Layers
Primer, base coat, flake broadcast, polyaspartic topcoat
Lifespan
Up to 15 Years
With proper prep and maintenance
Cure Time
Cure Window Varies
Varies by system, temperature, and conditions
Prep
Diamond Ground
Mechanical surface prep standard
Topcoat
Hard-Wearing
Polyaspartic hard-wearing topcoat standard
Product
Rockhard (XPS)
Commercial-grade certified epoxy system
← Swipe through the specs →
HOW IT'S DONE
STEP 01
Diamond Grind
Industrial grinding opens the concrete profile for a mechanical bond. Vacuum-filtered - your space stays clean.
STEP 02
Moisture Seal
Every slab gets a moisture barrier before anything goes down. What's below the concrete matters.
STEP 03
Base and Flake
Pigmented epoxy base goes down, flake is broadcast to full coverage, then scraped and vacuumed for a clean surface.
STEP 04
UV Topcoat
A UV-stable polyaspartic topcoat locks everything in and delivers a glass-like finish built to hold up to daily use.
the install process.
WHERE IT WORKS
WHERE IT WORKS
Residential Garage
Shop & Workshop
Commercial Space
Retail, service bays, showrooms, and light industrial. Flake epoxy delivers a professional, easy-to-clean surface that handles foot traffic, forklifts, and daily chemical exposure without breaking down.
Basement
Showroom
Residential Garage
Residential Garage
Shop & Workshop
Shop & Workshop
Commercial Space
Commercial Space
Basement
Basement
Showroom
Showroom
perfect Spaces.
Flake epoxy works in virtually any space. Use our instant quoter to get a real price for your space in under 60 seconds.
READY WHEN YOU ARE
Flake done right.
Full-broadcast flake with polyaspartic topcoat. Get your Calgary garage floor priced now.