Metallic epoxy is a poured coating system using Rockhard metallic pigments and a T200 high-gloss topcoat. Each floor is unique - pigments are guided during application, creating liquid depth and movement. Installed over diamond-ground concrete, with a moisture seal where the slab warrants it, by XPS Certified Installer Ribal Badin in Calgary.
Available in a range of metallic pigment combinations. Each sample shows a representative pour - your floor will have its own unique movement and depth.
carbon
pacific
cerberus
Silverstone
soverign
Crimson
← Swipe to see all finishes →
WHY METALLIC
Why Metallic
Built for Impact.
One of a Kind
Every metallic floor is unique. Pigments move differently on every pour - no two floors look the same.
High Gloss Finish
Deep, wet-look gloss that reflects light and makes any space feel larger and more premium.
Continuous Surface
No grout lines, no joints, no edges. One continuous poured surface from wall to wall.
Chemical Resistant
Stands up to oils, solvents, and cleaning chemicals. The topcoat seals everything below it completely.
Low Maintenance
Wipe clean with a mop or damp cloth. The sealed surface resists staining and doesn't require periodic recoating.
Commercial Grade
Installed with the same diamond-ground prep and commercial-grade topcoat as every EFC system - built to last.
← Swipe to see more →
What Makes Metallic Epoxy the Right Choice for Statement Spaces?
Metallic epoxy is a poured decorative system that uses metallic pigments suspended in a clear epoxy base, creating a floor with movement, depth, and a high-gloss finish that can't be replicated with paint or standard coatings. The pigments shift and flow during application, producing a one-of-a-kind result on every pour - no two metallic floors are identical.
Every metallic install starts with the same diamond grinding as all our systems - the decorative work is only as good as the prep underneath it. Where the slab warrants it, a moisture seal goes down before any coating touches the concrete. After prep, a pigmented base layer goes down, metallic pigments are poured and worked by hand, and the entire surface is locked in with a T200 hardening clear coat. The result is a seamless, high-gloss floor with serious depth and a finish that holds up.
Why Metallic Outperforms in Showrooms and High-End Spaces
The metallic pigment system creates a one-of-a-kind floor with depth, movement, and visual complexity that cannot be replicated. Each pour is unique - swirls, cells, and waves form naturally during application. It is the preferred system for luxury residential, high-end commercial, and any space where the floor itself is part of the design.
How Long Does Metallic Epoxy Last?
Metallic epoxy installed over a properly prepared slab can last up to 15 years in residential and commercial environments. Because the pigment is suspended within a high-build epoxy base, it does not fade, chip, or dull under normal use. Long-term performance depends on preparation - a ground, properly sealed slab will outlast any system installed over an unprepared surface.
SPECS
SPECS
System Specs.
System
3-4 Layers
Primer, pigmented base, metallic pour, T200 clear coat
Lifespan
Up to 15 Years
With proper prep and maintenance
Cure Time
Cure Window Varies
Varies by system, temperature, and conditions
Prep
Diamond Ground
Mechanical surface prep standard
Topcoat
T200 Clear
High-build hardening clear coat - where the strength lives
Product
Rockhard (XPS)
Commercial-grade certified epoxy system
← Swipe through the specs →
HOW IT'S DONE
STEP 01
Diamond Grind
Industrial grinding opens the concrete profile for a mechanical bond. Vacuum-filtered - your space stays clean.
STEP 02
Moisture Seal
Every slab gets a moisture barrier before anything goes down. What's below the concrete matters.
STEP 03
Base Coat
A pigmented base layer goes down first, sealing the slab and setting the foundation for the metallic pour.
STEP 04
Metallic Pour
Metallic pigments are poured and worked across the wet base. Swirls and movement form naturally - no two floors are the same.
STEP 05
T200 Clear Coat
A high-build T200 clear coat locks in the design and delivers a glass-like finish built to hold up to daily use.
the install process.
WHERE IT WORKS
WHERE IT WORKS
Car Showroom
Restaurant & Bar
Hotel & Lobby
High-end showrooms, retail lobbies, and feature spaces. Metallic epoxy creates a statement floor with liquid depth and movement that elevates any commercial environment.
Retail Boutique
Luxury Residence
Shop & Workshop
Shop & Workshop
Mechanic Bay
Mechanic Bay
Commercial Space
Commercial Space
Warehouse & Storage
Warehouse & Storage
Residential Garage
Residential Garage
perfect Spaces.
Metallic epoxy performs best in statement spaces - showrooms, luxury homes, studios, and commercial interiors where the floor is as important as any other design element.
READY WHEN YOU ARE
Liquid metal floors.
Each metallic pour is one of one. Get your price on a floor that moves with the light.