Solid colour epoxy floor coating delivers a clean, uniform finish using a 100% solids epoxy base coat and polyaspartic topcoat. Applied over diamond-ground concrete, solid colour systems provide commercial-grade durability for Calgary garages, basements, and utility spaces, lasting up to 15 years.
Any RAL colour can be matched. Bring a paint chip, a Pantone code, or a photo - we will match it and apply a test patch before committing to the full floor.
grey
Charcoal
Black
Beige
Light Grey
White
← Swipe to see all finishes →
WHY SOLID COLOUR
Why Solid
Clean. Modern.
Any RAL Colour
If it's in the RAL system, we can match it. Any colour, any tone - from stark white to deep navy to racing green.
Uniform Finish
No chips, no patterns - just a smooth, uniform coat of exactly the colour you chose. Minimal and deliberate.
Fastest Install
No broadcast step and no scraping means fewer variables and faster turnaround. The simplest system in our lineup.
Hard-Wearing Topcoat
Same hard-wearing polyaspartic topcoat as all our systems. The colour stays true with no fading or chalking.
Effortless to Clean
Smooth, continuous surface - no texture to trap dirt. A quick sweep is all the maintenance it needs.
Low Maintenance
No wax, no polish, no special products. Occasional damp mop keeps it looking exactly as installed.
← Swipe to see more →
What Makes Solid Colour Epoxy the Right Choice for Calgary?
Solid colour epoxy is the clean, deliberate choice. One colour, wall to wall - no chips, no patterns, no texture variation. For homeowners and businesses who value a modern, minimal aesthetic, it delivers a uniform floor with sharp visual clarity and none of the visual noise of other systems. It's also the most direct way to match a specific RAL colour - any tone in the system can be matched precisely.
The installation process is the same as every EFC system: diamond grinding first, then primer, a full pigmented base coat in your chosen colour, and a hard-wearing polyaspartic topcoat to lock it in. Fewer variables mean faster install times without any sacrifice in product quality or longevity.
Why Solid Colour Holds Up in Calgary Winters
Solid colour works best in spaces where the floor should complement the room rather than compete with it - modern interiors, gym and fitness spaces, retail environments, and residential garages where the focus is on cleanliness and simplicity. The smooth, seamless surface is effortless to maintain: a quick sweep and occasional damp mop is all it needs. There's no texture to trap dirt, no grout lines, and no pattern to show wear unevenly over time.
How Long Does Solid Colour Epoxy Last?
A solid colour epoxy floor installed on diamond-ground concrete and finished with a hard-wearing polyaspartic topcoat can last up to 15 years. Lifespan depends on prep quality, not the colour selected. Floors that were acid-etched instead of mechanically ground, or installed without addressing the slab condition properly, tend to delaminate within a few years. That is why every EFC install starts with the slab, not the product. If the foundation is not right, nothing applied over it will last.
SPECS
SPECS
System Specs.
System
3-4 Layers
Diamond profile to topcoat
Lifespan
Up to 15 Years
When prep is done right
Cure Time
24-48 Hours
Light traffic - 72hr for cars
Prep
Diamond Ground
Professional grinding, dust-free
Topcoat
Hard-Wearing
Colour stays true, no fade
Product
Rockhard (XPS)
Certified installer
← Swipe through the specs →
HOW IT'S DONE
the install process.
STEP 01
Diamond Grind
Industrial grinding opens the concrete profile for a mechanical bond. Vacuum-filtered - your space stays clean.
STEP 02
Diamond Ground
Every slab gets diamond ground to a CSP 3 profile. Mechanical prep is the only way to guarantee a long-term bond.
STEP 03
Epoxy Coat + Colour
Two coats of pigmented epoxy go down for full, uniform coverage. Colour is locked in at this stage.
STEP 04
Polyaspartic Topcoat
Hard-wearing polyaspartic clear coat seals everything. Chemical resistant, scratch resistant, built to take the daily punishment.
WHERE IT WORKS
WHERE IT WORKS
Residential Garage
Shop & Workshop
Commercial Space
Office lobbies, retail spaces, gyms, and commercial garages. Solid colour epoxy provides a clean, uniform finish that meets commercial durability standards without visual complexity.
Basement
Showroom
Residential Garage
Residential Garage
Shop & Workshop
Shop & Workshop
Commercial Space
Commercial Space
Basement
Basement
Showroom
Showroom
perfect Spaces.
Solid colour epoxy works in garages, basements, retail spaces, and studios. Use our instant quoter to get a real price for your space in under 60 seconds.
READY WHEN YOU ARE
Clean and bold.
Solid colour epoxy with gloss polyaspartic. Get your Calgary price in under two minutes.