Four finishes for every kind of floor in Calgary. Whether you want the classic garage look, something that genuinely turns heads, or a heavy duty commercial floor we have a system for it. Every one is built to last through Calgary winters for 15 to 20 years.
Every Calgary epoxy floor we install follows the same proven 4 step system. Surface preparation, moisture protection, high build base coat, and UV stable topcoat. From raw concrete to a sealed showroom finish that lasts.
Learn MoreCalgary garages are hard on floors. Road salt tracked in all winter, hot tires pulling at the surface in summer, moisture moving through the slab in spring, and freeze-thaw cycles working at anything that isn't properly bonded. Our floor systems are built specifically for these conditions.
Back in Service
System Lifespan
Every Install
Freeze-Thaw Rated
Polyaspartic Topcoat
Certified Installer
A professionally installed epoxy or polyaspartic floor lasts 15 to 20 years or more in Calgary. Lifespan depends on surface preparation quality — if the concrete is diamond ground and properly primed, the coating bonds mechanically and holds through decades of Alberta temperature swings. Floors that fail early were almost always applied over inadequately prepared surfaces.
Epoxy is the base coat that bonds to the concrete and builds thickness. Polyaspartic is the topcoat that provides UV resistance, abrasion resistance, and the finished surface. Most durable floor systems use both — epoxy for adhesion and build, polyaspartic for long-term performance and UV stability.
Yes. A properly bonded epoxy floor handles Calgary freeze-thaw cycles without issue. The risk is not the cold itself — it is moisture in the slab. Concrete absorbs water, water expands when frozen, and coatings that bond only to the surface will eventually lift. Diamond grinding removes the weak surface layer and opens the pores for a mechanical bond that moves with the slab through every season.
Most residential garages take one to two days. Day one covers prep and base coat. Day two is topcoat. You can drive on the floor 24 hours after the final coat. Commercial and industrial floors vary by scope — exact timelines are confirmed at the quoting stage, not adjusted after work starts.
No. We install epoxy flooring for residential garages, commercial spaces, industrial facilities, automotive shops, warehouses, and retail environments. Any concrete floor that needs to perform is a candidate. We also offer custom finishes beyond the four systems shown — metallic, quartz, flake, and solid colour are available in a wide range of colours and configurations.
Epoxy floors fail because of three things: inadequate surface preparation, the wrong product for the application, or a skipped primer coat. Proper prep means industrial diamond grinding — not acid etching — and a moisture assessment before anything touches the slab. We use commercial-grade systems, grind every slab, and never skip steps regardless of job size.
We offer four main systems: Flake epoxy, Metallic epoxy, Quartz epoxy, and Solid colour. Each is available in multiple colours and configurations. Custom blends and colours are available beyond what is shown on the site. If you have a specific finish in mind, contact us — the chances are we have done it or can source it.
Use the instant quote tool on this page for a ballpark range based on your square footage and system. For an exact written quote, we visit the space, assess the concrete, test for moisture, and give you a full scope breakdown before any commitment. Pricing is based on actual conditions, not a generic number.
We install epoxy floors in Calgary, Airdrie, Cochrane, Chestermere, Okotoks, and High River.
