A clean, seamless, industrial-grade coating system for commercial and industrial floors built to perform. 100% solids epoxy base over diamond-ground concrete, sealed with a UV-stable polyaspartic or polyurethane topcoat. Ready for heavy use from day one.
1–2
Day Install
20+
Year Lifespan
4×
Stronger Than DIY
Solid colour epoxy is a deliberate design choice. A uniform, seamless coating in a single consistent colour across the entire surface with no pattern, no aggregate, and no interruption. A dense, non-porous barrier that resists chemicals, abrasion, and continuous traffic. The same 100% solids epoxy base and UV-stable topcoat used in every system we install goes into every solid colour floor. This makes it the right choice for large commercial and industrial spaces where coverage, consistency, and performance matter above all else. Available in a wide range of standard colours with custom colour matching for branded commercial environments.
Solid colour installations are efficient and thorough. The slab is diamond-ground to CSP-2 and a penetrating primer is applied before two coats of pigmented 100% solids epoxy are rolled at the correct film build. A UV-stable polyaspartic or polyurethane topcoat completes the system with scratch resistance and your choice of gloss level. Most solid colour commercial floors are complete in one to two days.
Ask About Custom Colours →Calgary commercial floors face road salt, freeze-thaw moisture, and significant temperature variation across every season. Diamond grinding and a 100% solids base coat create a permanent mechanical bond that holds through it all.
Every flake system we install follows the same 4-step build. No shortcuts on prep, no skipped primer coats, no single-component products passed off as a full system.
Get a real price in under 60 seconds — no phone call required.
Most residential garages take 1–2 days. Day 1 is prep and base coat, day 2 is topcoat. You can drive on it 24 hours after final coat.
Epoxy is the base coat — it bonds to the concrete. Polyaspartic is the topcoat — it provides UV stability, abrasion resistance, and the final finish. You need both for a long-lasting floor.
Not when it’s installed correctly. Peeling happens when prep is skipped or acid etching is used instead of diamond grinding. Our UV-stable polyaspartic topcoat won’t yellow under sunlight.
We’ll bring physical samples to your site visit so you can see them on your actual floor. You can also browse our colour gallery above to narrow it down before we meet.
Clean, uniform solid colour options for commercial and industrial floors. Custom colour matching is available for branded commercial environments. Contact us to discuss your project.
Flake · Most Popular
Domino
Classic black and white broadcast. Clean, durable, timeless in any garage.
Flake
Orbit
Multi-tone grey blend with subtle warmth. Hides wear and complements any vehicle.
Flake
Cabin Fever
Rich earth tones — popular in home workshops and triple garages.
Get a real price in under 60 seconds — no phone call required.
Get Instant Quote
Get a real price in under 60 seconds — no phone call required.
⚡ Get Instant Quote